INF: Showing section: 'actions' INF: INF: Read parameter: INF: control?read§ion=actions&[&] INF: INF: Set parameter: INF: control?set§ion=actions&=[&=] INF: INF: Special commands are available for some parameters. INF: Available special commands are: toggle max min ++ -- + - INF: Usage: == #SECTION actionhandler ah1_name= # (string constant) ah1_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah1_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah1_events= # ah1_deadtime=5 # 0 .. 3600 ah1_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah1_subactions #-W ah1_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah1_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah1_subactions:action "Select the Action Profile to be executed." #-W ah1_subactions:timeout 0 .. 3600 #-P ah1_subactions:timeout "Action Timeout": #-E ah1_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah1_subactions= # (profile string constant) ah2_name= # (string constant) ah2_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah2_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah2_events= # ah2_deadtime=5 # 0 .. 3600 ah2_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah2_subactions #-W ah2_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah2_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah2_subactions:action "Select the Action Profile to be executed." #-W ah2_subactions:timeout 0 .. 3600 #-P ah2_subactions:timeout "Action Timeout": #-E ah2_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah2_subactions= # (profile string constant) ah3_name= # (string constant) ah3_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah3_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah3_events= # ah3_deadtime=5 # 0 .. 3600 ah3_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah3_subactions #-W ah3_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah3_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah3_subactions:action "Select the Action Profile to be executed." #-W ah3_subactions:timeout 0 .. 3600 #-P ah3_subactions:timeout "Action Timeout": #-E ah3_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah3_subactions= # (profile string constant) ah4_name= # (string constant) ah4_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah4_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah4_events= # ah4_deadtime=5 # 0 .. 3600 ah4_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah4_subactions #-W ah4_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah4_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah4_subactions:action "Select the Action Profile to be executed." #-W ah4_subactions:timeout 0 .. 3600 #-P ah4_subactions:timeout "Action Timeout": #-E ah4_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah4_subactions= # (profile string constant) ah5_name= # (string constant) ah5_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah5_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah5_events= # ah5_deadtime=5 # 0 .. 3600 ah5_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah5_subactions #-W ah5_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah5_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah5_subactions:action "Select the Action Profile to be executed." #-W ah5_subactions:timeout 0 .. 3600 #-P ah5_subactions:timeout "Action Timeout": #-E ah5_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah5_subactions= # (profile string constant) ah6_name= # (string constant) ah6_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah6_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah6_events= # ah6_deadtime=5 # 0 .. 3600 ah6_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah6_subactions #-W ah6_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah6_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah6_subactions:action "Select the Action Profile to be executed." #-W ah6_subactions:timeout 0 .. 3600 #-P ah6_subactions:timeout "Action Timeout": #-E ah6_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah6_subactions= # (profile string constant) ah7_name= # (string constant) ah7_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah7_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah7_events= # ah7_deadtime=5 # 0 .. 3600 ah7_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah7_subactions #-W ah7_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah7_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah7_subactions:action "Select the Action Profile to be executed." #-W ah7_subactions:timeout 0 .. 3600 #-P ah7_subactions:timeout "Action Timeout": #-E ah7_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah7_subactions= # (profile string constant) ah8_name= # (string constant) ah8_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah8_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah8_events= # ah8_deadtime=5 # 0 .. 3600 ah8_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah8_subactions #-W ah8_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah8_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah8_subactions:action "Select the Action Profile to be executed." #-W ah8_subactions:timeout 0 .. 3600 #-P ah8_subactions:timeout "Action Timeout": #-E ah8_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah8_subactions= # (profile string constant) ah9_name= # (string constant) ah9_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah9_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah9_events= # ah9_deadtime=5 # 0 .. 3600 ah9_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah9_subactions #-W ah9_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah9_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah9_subactions:action "Select the Action Profile to be executed." #-W ah9_subactions:timeout 0 .. 3600 #-P ah9_subactions:timeout "Action Timeout": #-E ah9_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah9_subactions= # (profile string constant) ah10_name= # (string constant) ah10_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah10_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah10_events= # ah10_deadtime=5 # 0 .. 3600 ah10_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah10_subactions #-W ah10_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah10_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah10_subactions:action "Select the Action Profile to be executed." #-W ah10_subactions:timeout 0 .. 3600 #-P ah10_subactions:timeout "Action Timeout": #-E ah10_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah10_subactions= # (profile string constant) ah11_name= # (string constant) ah11_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah11_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah11_events= # ah11_deadtime=5 # 0 .. 3600 ah11_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah11_subactions #-W ah11_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah11_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah11_subactions:action "Select the Action Profile to be executed." #-W ah11_subactions:timeout 0 .. 3600 #-P ah11_subactions:timeout "Action Timeout": #-E ah11_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah11_subactions= # (profile string constant) ah12_name= # (string constant) ah12_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah12_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah12_events= # ah12_deadtime=5 # 0 .. 3600 ah12_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah12_subactions #-W ah12_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah12_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah12_subactions:action "Select the Action Profile to be executed." #-W ah12_subactions:timeout 0 .. 3600 #-P ah12_subactions:timeout "Action Timeout": #-E ah12_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah12_subactions= # (profile string constant) ah13_name= # (string constant) ah13_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah13_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah13_events= # ah13_deadtime=5 # 0 .. 3600 ah13_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah13_subactions #-W ah13_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah13_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah13_subactions:action "Select the Action Profile to be executed." #-W ah13_subactions:timeout 0 .. 3600 #-P ah13_subactions:timeout "Action Timeout": #-E ah13_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah13_subactions= # (profile string constant) ah14_name= # (string constant) ah14_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah14_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah14_events= # ah14_deadtime=5 # 0 .. 3600 ah14_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah14_subactions #-W ah14_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah14_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah14_subactions:action "Select the Action Profile to be executed." #-W ah14_subactions:timeout 0 .. 3600 #-P ah14_subactions:timeout "Action Timeout": #-E ah14_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah14_subactions= # (profile string constant) ah15_name= # (string constant) ah15_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah15_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah15_events= # ah15_deadtime=5 # 0 .. 3600 ah15_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah15_subactions #-W ah15_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah15_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah15_subactions:action "Select the Action Profile to be executed." #-W ah15_subactions:timeout 0 .. 3600 #-P ah15_subactions:timeout "Action Timeout": #-E ah15_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah15_subactions= # (profile string constant) ah16_name= # (string constant) ah16_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah16_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah16_events= # ah16_deadtime=5 # 0 .. 3600 ah16_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah16_subactions #-W ah16_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah16_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah16_subactions:action "Select the Action Profile to be executed." #-W ah16_subactions:timeout 0 .. 3600 #-P ah16_subactions:timeout "Action Timeout": #-E ah16_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah16_subactions= # (profile string constant) ah17_name= # (string constant) ah17_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah17_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah17_events= # ah17_deadtime=5 # 0 .. 3600 ah17_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah17_subactions #-W ah17_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah17_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah17_subactions:action "Select the Action Profile to be executed." #-W ah17_subactions:timeout 0 .. 3600 #-P ah17_subactions:timeout "Action Timeout": #-E ah17_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah17_subactions= # (profile string constant) ah18_name= # (string constant) ah18_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah18_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah18_events= # ah18_deadtime=5 # 0 .. 3600 ah18_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah18_subactions #-W ah18_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah18_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah18_subactions:action "Select the Action Profile to be executed." #-W ah18_subactions:timeout 0 .. 3600 #-P ah18_subactions:timeout "Action Timeout": #-E ah18_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah18_subactions= # (profile string constant) ah19_name= # (string constant) ah19_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah19_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah19_events= # ah19_deadtime=5 # 0 .. 3600 ah19_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah19_subactions #-W ah19_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah19_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah19_subactions:action "Select the Action Profile to be executed." #-W ah19_subactions:timeout 0 .. 3600 #-P ah19_subactions:timeout "Action Timeout": #-E ah19_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah19_subactions= # (profile string constant) ah20_name= # (string constant) ah20_arming=enable # enable, disable, ac1, ac2, ac3, ac4, ac5, acl ah20_timetable= # , Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes, Table_6 ah20_events= # ah20_deadtime=5 # 0 .. 3600 ah20_chaining=par # par, par_succ, ser, ser_succ, ser_fail #PROFILE ah20_subactions #-W ah20_subactions:action FT%2Cftp0, FT%2Cftp1, FT%2Cftp2, FT%2Cftp3, EM%2Cmail0, EM%2Cmail1, EM%2Cmail2, EM%2Cmail3, EM%2Cmail4, IP%2Cip0, IP%2Cip1, IP%2Cip2, IP%2Cip3, IP%2Cip4, SD%2Csd0, VA%2Cva0 #-P ah20_subactions:action "Action Type and Profile": "FTP: FTP-Webcam", "FTP: FTP-AlarmClip", "FTP: FTP-Archiving", "FTP: FTP-Day-Period", "E-Mail: AlarmMail", "E-Mail: NotifyMail", "E-Mail: MailWithMxPEGClip", "E-Mail: MailWithStoryImages", "E-Mail: MailSystemStatus24", "IP Notify: MxCC-Alarm", "IP Notify: MxGuard-PopUp", "IP Notify: SimpleNotify", "IP Notify: MultipleNotify", "IP Notify: HttpRequest", "Play Sound: StandardSounds", "Visual Alarm: Red Frame" #-E ah20_subactions:action "Select the Action Profile to be executed." #-W ah20_subactions:timeout 0 .. 3600 #-P ah20_subactions:timeout "Action Timeout": #-E ah20_subactions:timeout "If this action runs longer than the time specified [0..3600 s], it is aborted and returns an error; 0 to deactivate." ah20_subactions= # (profile string constant) #-P ah1_name "Name": #-H ah1_name "Action Group" #-E ah1_name "The name is purely informational." #-P ah1_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah1_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah1_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah1_timetable "Time table for this action profile (Time Tables)." #-P ah1_events "Event Selection": #-H ah1_events "Event Selection" #-E ah1_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah1_deadtime "Action Deadtime": #-H ah1_deadtime "Action Details" #-E ah1_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah1_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah1_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah1_subactions "Action %i": #-P ah2_name "Name": #-H ah2_name "Action Group" #-E ah2_name "The name is purely informational." #-P ah2_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah2_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah2_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah2_timetable "Time table for this action profile (Time Tables)." #-P ah2_events "Event Selection": #-H ah2_events "Event Selection" #-E ah2_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah2_deadtime "Action Deadtime": #-H ah2_deadtime "Action Details" #-E ah2_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah2_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah2_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah2_subactions "Action %i": #-P ah3_name "Name": #-H ah3_name "Action Group" #-E ah3_name "The name is purely informational." #-P ah3_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah3_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah3_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah3_timetable "Time table for this action profile (Time Tables)." #-P ah3_events "Event Selection": #-H ah3_events "Event Selection" #-E ah3_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah3_deadtime "Action Deadtime": #-H ah3_deadtime "Action Details" #-E ah3_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah3_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah3_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah3_subactions "Action %i": #-P ah4_name "Name": #-H ah4_name "Action Group" #-E ah4_name "The name is purely informational." #-P ah4_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah4_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah4_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah4_timetable "Time table for this action profile (Time Tables)." #-P ah4_events "Event Selection": #-H ah4_events "Event Selection" #-E ah4_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah4_deadtime "Action Deadtime": #-H ah4_deadtime "Action Details" #-E ah4_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah4_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah4_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah4_subactions "Action %i": #-P ah5_name "Name": #-H ah5_name "Action Group" #-E ah5_name "The name is purely informational." #-P ah5_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah5_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah5_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah5_timetable "Time table for this action profile (Time Tables)." #-P ah5_events "Event Selection": #-H ah5_events "Event Selection" #-E ah5_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah5_deadtime "Action Deadtime": #-H ah5_deadtime "Action Details" #-E ah5_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah5_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah5_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah5_subactions "Action %i": #-P ah6_name "Name": #-H ah6_name "Action Group" #-E ah6_name "The name is purely informational." #-P ah6_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah6_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah6_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah6_timetable "Time table for this action profile (Time Tables)." #-P ah6_events "Event Selection": #-H ah6_events "Event Selection" #-E ah6_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah6_deadtime "Action Deadtime": #-H ah6_deadtime "Action Details" #-E ah6_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah6_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah6_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah6_subactions "Action %i": #-P ah7_name "Name": #-H ah7_name "Action Group" #-E ah7_name "The name is purely informational." #-P ah7_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah7_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah7_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah7_timetable "Time table for this action profile (Time Tables)." #-P ah7_events "Event Selection": #-H ah7_events "Event Selection" #-E ah7_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah7_deadtime "Action Deadtime": #-H ah7_deadtime "Action Details" #-E ah7_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah7_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah7_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah7_subactions "Action %i": #-P ah8_name "Name": #-H ah8_name "Action Group" #-E ah8_name "The name is purely informational." #-P ah8_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah8_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah8_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah8_timetable "Time table for this action profile (Time Tables)." #-P ah8_events "Event Selection": #-H ah8_events "Event Selection" #-E ah8_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah8_deadtime "Action Deadtime": #-H ah8_deadtime "Action Details" #-E ah8_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah8_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah8_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah8_subactions "Action %i": #-P ah9_name "Name": #-H ah9_name "Action Group" #-E ah9_name "The name is purely informational." #-P ah9_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah9_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah9_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah9_timetable "Time table for this action profile (Time Tables)." #-P ah9_events "Event Selection": #-H ah9_events "Event Selection" #-E ah9_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah9_deadtime "Action Deadtime": #-H ah9_deadtime "Action Details" #-E ah9_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah9_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah9_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah9_subactions "Action %i": #-P ah10_name "Name": #-H ah10_name "Action Group" #-E ah10_name "The name is purely informational." #-P ah10_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah10_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah10_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah10_timetable "Time table for this action profile (Time Tables)." #-P ah10_events "Event Selection": #-H ah10_events "Event Selection" #-E ah10_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah10_deadtime "Action Deadtime": #-H ah10_deadtime "Action Details" #-E ah10_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah10_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah10_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah10_subactions "Action %i": #-P ah11_name "Name": #-H ah11_name "Action Group" #-E ah11_name "The name is purely informational." #-P ah11_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah11_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah11_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah11_timetable "Time table for this action profile (Time Tables)." #-P ah11_events "Event Selection": #-H ah11_events "Event Selection" #-E ah11_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah11_deadtime "Action Deadtime": #-H ah11_deadtime "Action Details" #-E ah11_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah11_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah11_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah11_subactions "Action %i": #-P ah12_name "Name": #-H ah12_name "Action Group" #-E ah12_name "The name is purely informational." #-P ah12_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah12_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah12_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah12_timetable "Time table for this action profile (Time Tables)." #-P ah12_events "Event Selection": #-H ah12_events "Event Selection" #-E ah12_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah12_deadtime "Action Deadtime": #-H ah12_deadtime "Action Details" #-E ah12_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah12_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah12_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah12_subactions "Action %i": #-P ah13_name "Name": #-H ah13_name "Action Group" #-E ah13_name "The name is purely informational." #-P ah13_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah13_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah13_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah13_timetable "Time table for this action profile (Time Tables)." #-P ah13_events "Event Selection": #-H ah13_events "Event Selection" #-E ah13_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah13_deadtime "Action Deadtime": #-H ah13_deadtime "Action Details" #-E ah13_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah13_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah13_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah13_subactions "Action %i": #-P ah14_name "Name": #-H ah14_name "Action Group" #-E ah14_name "The name is purely informational." #-P ah14_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah14_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah14_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah14_timetable "Time table for this action profile (Time Tables)." #-P ah14_events "Event Selection": #-H ah14_events "Event Selection" #-E ah14_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah14_deadtime "Action Deadtime": #-H ah14_deadtime "Action Details" #-E ah14_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah14_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah14_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah14_subactions "Action %i": #-P ah15_name "Name": #-H ah15_name "Action Group" #-E ah15_name "The name is purely informational." #-P ah15_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah15_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah15_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah15_timetable "Time table for this action profile (Time Tables)." #-P ah15_events "Event Selection": #-H ah15_events "Event Selection" #-E ah15_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah15_deadtime "Action Deadtime": #-H ah15_deadtime "Action Details" #-E ah15_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah15_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah15_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah15_subactions "Action %i": #-P ah16_name "Name": #-H ah16_name "Action Group" #-E ah16_name "The name is purely informational." #-P ah16_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah16_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah16_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah16_timetable "Time table for this action profile (Time Tables)." #-P ah16_events "Event Selection": #-H ah16_events "Event Selection" #-E ah16_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah16_deadtime "Action Deadtime": #-H ah16_deadtime "Action Details" #-E ah16_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah16_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah16_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah16_subactions "Action %i": #-P ah17_name "Name": #-H ah17_name "Action Group" #-E ah17_name "The name is purely informational." #-P ah17_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah17_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah17_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah17_timetable "Time table for this action profile (Time Tables)." #-P ah17_events "Event Selection": #-H ah17_events "Event Selection" #-E ah17_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah17_deadtime "Action Deadtime": #-H ah17_deadtime "Action Details" #-E ah17_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah17_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah17_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah17_subactions "Action %i": #-P ah18_name "Name": #-H ah18_name "Action Group" #-E ah18_name "The name is purely informational." #-P ah18_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah18_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah18_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah18_timetable "Time table for this action profile (Time Tables)." #-P ah18_events "Event Selection": #-H ah18_events "Event Selection" #-E ah18_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah18_deadtime "Action Deadtime": #-H ah18_deadtime "Action Details" #-E ah18_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah18_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah18_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah18_subactions "Action %i": #-P ah19_name "Name": #-H ah19_name "Action Group" #-E ah19_name "The name is purely informational." #-P ah19_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah19_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah19_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah19_timetable "Time table for this action profile (Time Tables)." #-P ah19_events "Event Selection": #-H ah19_events "Event Selection" #-E ah19_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah19_deadtime "Action Deadtime": #-H ah19_deadtime "Action Details" #-E ah19_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah19_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah19_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah19_subactions "Action %i": #-P ah20_name "Name": #-H ah20_name "Action Group" #-E ah20_name "The name is purely informational." #-P ah20_arming "Arming": "Enabled", "Off", "CS1", "CS2", "CS3", "CS4", "CS5", "CSL" #-E ah20_arming "Controls this action group:
Enabled: activate the group.
Off: deactivate the group.
SI: group armed by signal input.
CS: group armed by custom signal as defined in General Event Settings.
" #-P ah20_timetable "Time Table": "(No time table)", "Weekdays_Mo-Fr", "Weekend_Sa-So", "Opening_Times", "Closing_Times", "MyCustomTimes", "Table_6" #-E ah20_timetable "Time table for this action profile (Time Tables)." #-P ah20_events "Event Selection": #-H ah20_events "Event Selection" #-E ah20_events "Select the events which will trigger the actions below.
Use [Ctrl]-Click to select more than one event.
Events in brackets need to be activated first." #-P ah20_deadtime "Action Deadtime": #-H ah20_deadtime "Action Details" #-E ah20_deadtime "Time to wait [0..3600 s] before a new action can take place." #-P ah20_chaining "Action Chaining": "Simultaneously", "Simultaneously until first success", "Consecutively", "Consecutively until first success", "Consecutively until first failure" #-E ah20_chaining "Choose how the status of each subaction influences the execution of all others.
Simultaneously: All actions are executed simultaneously.
Simultaneously until first success: Simultaneous execution, but as soon as one action succeeds (i.e. has been completed or the phone is picked up), all others are terminated.
Consecutively: All actions are executed in the specified order.
Consecutively until first success: Consecutive execution, but as soon as one action succeeds, the following actions are not executed.
Consecutively until first failure: Consecutive execution, but as soon as one action fails, the following actions are not executed.
" #-P ah20_subactions "Action %i": #ENDSECTION actionhandler